Straight

ImageNameSummaryPriceBuy
B 64024 Gunter Stainless Steel Osteotome, 8-1/2″ (21.5cm)
Gunter Stainless Steel Osteotome, 8-1/2″ (21.5cm)

Low profile, guarded lateral osteotome.

  • : Stainless Steel
  • : 8-1/2″ (21.5cm)
B 64005 Nahai SS Osteotome, 7″ (18cm), 2mm Straight
Nahai SS Osteotome, 7″ (18cm), 2mm Straight

Multi purpose osteotome. Serrated handle for better grip and control.

B 64031 Parkes Gouge Osteotome, 7″ (18cm), 6.5mm
Parkes Gouge Osteotome, 7″ (18cm), 6.5mm

Double guarded osteotome, ideal for removing chips or small humps from the nasal dorsum.

B 64019 Parkes Osteotome, 7″ (18cm), Straight
Parkes Osteotome, 7″ (18cm), Straight

Popular guarded osteotome for controlled cuts.

B 64034 Sheehan Stainless Steel Osteotome, 6-1/4″ (16cm)
Sheehan Stainless Steel Osteotome, 6-1/4″ (16cm)

Sturdy, sharp multi-purpose osteotome.

  • : Straight
  • : Stainless Steel
  • : 6-1/4″ (16cm)
B 64011 Silver Stainless Steel Osteotome, 7″ (18cm)
Silver Stainless Steel Osteotome, 7″ (18cm)

Original delicate pattern guarded lateral osteotome. “V” shaped blade facilitates control during lateral osteotomies.

  • : Stainless Steel
  • : 7″ (18cm)
B 63755 Straight Molt Elevator, 7-1/2″ (18.7cm), Double Ended
Straight Molt Elevator, 7-1/2″ (18.7cm), Double Ended

Stainless Steel. Double-ended elevator for elevation of the periosteum and perichondrium.

B 65085 #1 Ramirez Endoforehead Dissector, 9-1/2" (24cm), Frontotemporal, Straight
#1 Ramirez Endoforehead Dissector, 9-1/2" (24cm), Frontotemporal, Straight

#1 Dissector. For the initial subperiosteal dissection through the incisions in the scalp.

Abdominoplasty Needle Holder, 12-1/2"(32cm), Straight Shaft, 4000 Jaw
Abdominoplasty Needle Holder, 12-1/2″ (32cm), Straight Shaft, 4000 Jaw

Abdominal needle holder with 4000 jaw.

B 53101 Aston Reduction Black Diamond™ Rasp, 8″ (20cm), "Pull"
Aston Reduction Black Diamond™ Rasp, 8″ (20cm)

Black Diamond™ tungsten carbide rasps, excellent for cartilage and bone. Specially designed for accurate reduction of the cartilaginous dorsum and lowering of upper lateral cartilage.

  • : Stainless Steel w/Tungsten Carbide insert
  • : 8″ (20cm)
Aufricht Rasp, 8″ (20cm), 8mm x 30mm, Up Cutting / Down Cutting
Aufricht Rasp, 8″ (20cm), 8mm x 30mm

“Push/Pull” rasp for bi-directional cutting.

  • : 8″ (20cm)
B 50110 Baumgartner Onyx Needle Holder, 5-1/2″ (14cm), 2500 Jaw
Baumgartner Onyx Needle Holder, 5-1/2″ (14cm), 2500 Jaw

Also known as “Baby Mayo Hegar”. Use with 2-0 or finer suture.

B 55833 Castanares Serrated Supercut Scissors, 6-1/4″ (16cm), Straight
Castanares Serrated Supercut Scissors, 6-1/4″ (16cm), Straight

Designed to facilitate rapid and efficient undermining of skin flaps during face lift procedures.

Castroviejo Onyx Needle Holder, Flat Handle w/Lock, 5-1/2″ (14cm)
Castroviejo Onyx Needle Holder, Flat Handle w/Lock, 5-1/2″ (14cm)

Popular for delicate procedures. Flat handle design is available with or without lock. Use with 6-0 suture or finer.

  • : Tungsten Carbide
  • : 5-1/2″ (14cm)
Castroviejo Onyx Needle Holder, Round Handle w/Lock
Castroviejo Onyx Needle Holder, Round Handle w/Lock

Popular for delicate procedures. Round handles facilitate fingertip control. Use with 6-0 suture or finer.

    B 65056 Daniel Endoforehead Elevator, 9-1/4" (23.5cm), Straight
    Daniel Endoforehead Elevator, 9-1/4″ (23.5cm), StraightThis elevator has rounded edges and semi-sharp tips that come in four configurations. …
    B 50010 Debakey Onyx Needle Holder, 4000 Jaw
    Debakey Onyx Needle Holder, 4000 Jaw

    Delicate cardiovascular needle holder. Intended for 4/0 to 6/0 suture.

    • : Tungsten Carbide
    • : 4000 Jaw
    B 50042 Debakey X-Lite Onyx Needle Holder, 7000 Jaw
    Debakey X-Lite Onyx Needle Holder, 7000 Jaw

    Delicate cardiovascular needle holder. Intended for 4/0 to 6/0 suture.

    • : Tungsten Carbide
    • : 7000 Jaw
    B 50400 Derf Onyx Needle Holder, 4-3/4″ (12cm), 4000 Jaw
    Derf Onyx Needle Holder, 4-3/4″ (12cm), 4000 Jaw

    Short, delicate jaws. Use with 4-0 and finer suture.

    B 65030 Endo Cup Biopsy Forceps, 6" (15cm), Straight, Malleable
    Endo Cup Biopsy Forceps, 6″ (15cm), Straight, MalleableMalleable punch for precise resection of the procerus muscle. New handle design allows …
    B 65099 Ergo Handle Endoforehead Fascia Needle Holder, 6" (15cm), Shaft Straight, Malleable
    Ergo Handle Endoforehead Fascia Needle Holder, 6″ (15cm), Shaft Straight, Malleable

    Malleable needle holder for passing “SOOF” sutures.

    B 65097 Ergo Handle Endoforehead Grasper, 6" (15cm), Shaft Straight, Malleable
    Ergo Handle Endoforehead Grasper, 6″ (15cm), Shaft Straight, Malleable

    Malleable grasper for handling of tissue surrounding supratrochlear and supraorbital nerves.

    B 65096 Ergo Handle Endoforehead Procerus Punch Forceps, 6" (15cm), Shaft Straight, Malleable
    Ergo Handle Endoforehead Procerus Punch Forceps, 6″ (15cm), Shaft Straight, Malleable

    Malleable punch for precise resection of the procerus muscle.

    B 53094 Fomon Black Diamond™ Push-Pull Rasp, 8-1/2″ (21.5cm)
    Fomon Black Diamond™ Push-Pull Rasp, 8-1/2″ (21.5cm)

    Black Diamond™ “push/pull” double-ended tungsten carbide rasp for bi-directional cutting.

    Surface grit progresses from most fine (#2) to most coarse (#8).

    • : 8-1/2″ (21.5cm)
    • : Stainless Steel w/Tungsten Carbide insert
    • : Push-Pull
    B 53062 Fomon Black Diamond™ Rasp, 8-1/2″ (21.5cm), "Pull"
    Fomon Black Diamond™ Rasp, 8-1/2″ (21.5cm)

    Black Diamond™ double-ended tungsten carbide rasp for increased sharpness and longevity.

    Surface grit progresses from most fine (#1) to most coarse (#8).

    • : 8-1/2″ (21.5cm)
    • : Stainless Steel w/Tungsten Carbide insert
    • : Pull
    B 63720 Gonzalez Type Gluteal Dissector, 10-1/4″ (26cm)
    Gonzalez Type Gluteal Dissector, 10-1/4″ (26cm)

    Stainless Steel. Excellent for gluteal dissection. Large dissecting platform for atraumatic spread dissection.

    Halsey Needle Holder, 5″ (12.5cm)
    Halsey Needle Holder, 5″ (12.5cm)

    Long, delicate jaws intended for 5-0 and finer suture. Available with smooth or 4000 jaw.

      B 62150 Joseph Saw, 7-1/4″ (18.5cm) - Left Bayonet
      Joseph Saw, 7-1/4″ (18.5cm)

      Popular saw for removing nasal bone.

      • : 7-1/4″ (18cm)
      Livie Rasp, 6-3/4″ (17cm)
      Livie Rasp, 6-3/4″ (17cm)

      Narrow 2 mm wide, extra thin blade useful for minor office procedures and touch-up rhinoplasty.
      Two cutting surfaces (fine and coarse) for optimal results.

      • : 6-3/4″ (17cm)
      • : Stainless Steel
      B 53135 McCollough Twist Black Diamond™ Fomon Rasp, 8-1/2″ (21.5cm)
      McCollough Twist Black Diamond™ Fomon Rasp, 8-1/2″ (21.5cm)

      McCollough Twist Black Diamond™ rasp is double-ended for increased sharpness and longevity. Twist handle for added control and comfort.

      Surface grit progresses from most fine (#2) to most coarse (#8).

      • : 8-1/2″ (21.5cm)
      • : Stainless Steel w/Tungsten Carbide insert
      B 3JF-3-18d.3 Micro Vessel Dilator, Flat Handle, Straight
      Micro Vessel Dilator, Flat Handle, Straight
        Olsen Hegar Onyx Needle Holder/Scissors Combo
        Olsen Hegar Onyx Needle Holder/Scissors Combo

        Combination needle holder and scissors.  4000 jaw intended for 4-0 or finer suture. 2500 jaw intended for 3-0 or finer suture.

        • : Tungsten Carbide
        • : 2500 Jaw : 4000 Jaw
        Olsen Webster Onyx Needle Holder/Scissors Combo, 4-1/2″ (11.5cm)
        Olsen Webster Onyx Needle Holder/Scissors Combo, 4-1/2″ (11.5cm)

        Combination needle holder and scissors with very delicate jaws. Use with 5-0 or finer suture.

        • : Tungsten Carbide
        • : 4-1/2″ (11.5cm)
        B 50414 PAR Onyx Needle Holder, 7000 Jaw
        PAR Onyx Needle Holder, 7000 Jaw

        Delicate tips and fine shanks to easily access small and delicate areas. Use with 5-0 or finer suture.

        • : Tungsten Carbide
        • : 7000 Jaw
        B 53083 Parkes Black Diamond™ Push-Pull Rasp, 8″ (20cm)
        Parkes Black Diamond™ Push-Pull Rasp, 8″ (20cm)

        Black Diamond™ “push/pull” tungsten carbide rasp for bi-directional cutting.

        Surface grit progresses from most fine (#3) to most coarse (#8).

        • : 8″ (20cm)
        • : Stainless Steel w/Tungsten Carbide insert
        • : Push-Pull
        B 53071 Parkes Black Diamond™ Rasp, 8″ (20cm), "Pull"
        Parkes Black Diamond™ Rasp, 8″ (20cm)

        Black Diamond™ with large handle provides positive grip with superior cutting surfaces.

        Surface grit progresses from most fine (#1) to most coarse (#8).

        • : 8″ (20cm)
        • : Stainless Steel w/Tungsten Carbide insert
        • : Pull
        Peet Nasal Rasp, 7-1/2″ (19cm)
        Peet Nasal Rasp, 7-1/2″ (19cm)

        Finishing rasp utilizing a diamond particle surface to create a smooth result.

        • : 7-1/2″ (19cm)
        • : Fine
        Ryder Onyx Needle Holders
        Ryder Onyx Needle Holder

        Fine parallel jaws prevent flattening of needles. Available with 4000 Jaw (2 mm) or 7000 Jaw (1 mm).

        • : Tungsten Carbide
        B 68620-10 Semken Bipolar Insulated Forceps, 6″ (15cm), Straight, 1.0mm Tip
        Semken Bipolar Insulated Forceps, 6″ (15cm), Straight, 1.0mm Tip

        Delicate tips for precise coagulation. Polished tips to facilitate cleaning.

        Tebbetts(TM) Delicate Onyx Needle Holder
        Tebbetts™ Delicate Onyx Needle Holder

        Delicate needle holder with fine tips for delicate tissue. Use with 5-0 or finer suture.

        • : 4000 Jaw : 7000 Jaw
        • : Tungsten Carbide
        B 54430 Titanium Crile Wood Needle Holder, 6" (15cm), Diamond Dust(TM) Jaw
        Titanium Crile Wood Needle Holder, 6″ (15cm), Diamond Dust™ Jaw

        Titanium with general purpose medium jaw. Use with 4-0 or finer suture.

        B 54410 Titanium Halsey Needle Holder, 5″ (12.5cm), Diamond Dust™ Jaw
        Titanium Halsey Needle Holder, 5″ (12.5cm), Diamond Dust™ Jaw

        Lightweight, corrosion resistant, and anti-magnetic. Use with 5-0 or finer suture.

        B 54414 Titanium PAR Needle Holder, 5″ (12.5cm), Diamond Dust(TM) Jaw
        Titanium PAR Needle Holder, 5″ (12.5cm), Diamond Dust™ Jaw

        Light weight, corrosion resistant and anti-magnetic with fine tips. Intended for 5-0 or finer suture.

        B 54405 Titanium Webster Needle Holder, 4-1/2″ (11.5cm), Diamond Dust™ Jaw
        Titanium Webster Needle Holder, 4-1/2″ (11.5cm), Diamond Dust™ Jaw

        Lightweight, corrosion resistant, and anti-magnetic. Use with 5-0 and finer suture.

        B 63710 Trepsat "Spoon" Spreader/Dissector, 8″ (20.5cm), Straight, Semi-Sharp Tips
        Trepsat "Spoon" Spreader/Dissector, 8″ (20.5cm), Straight, Semi-Sharp Tips

        Excellent for flap dissection. Oval shape dissecting platform for atraumatic spread dissection.

        Webster Onyx Needle Holder, 4-1/2″ (11.5cm)
        Webster Onyx Needle Holder, 4-1/2″ (11.5cm)

        Delicate, popular needle holder. Use with 5-0 or finer suture. (Smooth or 7000 – Jaw)

        • : 4-1/2″ (11.5cm)
        • : Tungsten Carbide
        Wire Twisters Onyx Needle Holder, 6″ (15cm)
        Wire Twisters Onyx Needle Holder, 6″ (15cm)

        Heavy jaws. Holds up to 18 gauge wire.

        • : Tungsten Carbide
        B 52217 Gorney Onyx Morselizer, 8" (20cm), Straight
        Gorney Onyx Morselizer, 8″ (20cm), Straight

        Septal morselizer with unique jaws.

        Micro Forceps, 5-3/8"(13.5cm), Flat Handle 9mm Wide, Tip 0.3mm, Tying Platform, Straight
        Micro Forceps, Flat Handle 7mm Wide, 5-3/8″ (13.5cm), 0.3mm Tip, Straight
        Micro Forceps, 6"(15cm), 8mm Round Handle, Counterweight With Guide Pin 2mm, Dilator Tip 5x .3mm, Straight
        Micro Vessel Dilator, Round Handle, 6”(15cm), 0.2mm Tip, Straight

        Parallel, extra-delicate flattened tips enable precise atraumatic dilation of blood vessels. Round handle affords the surgeon ergonomic control, with reduced hand fatigue and tip tremor.